Manual

T8401C ELECTRONIC THERMOSTATS

69-1483—1 2

Fig. 2. Typical location of thermostat.

This thermostat is a precision instrument and was

carefully adjusted at the factory. Handle it carefully.

Mounting Wallplate to Wall

IMPORTANT

Level only for appearance. The thermostat func-

tions normally even when not level.

Mount wallplate, T8401C, and the screws provided (see

Fig. 3) as follows:

1. Place the wallplate at the desired location on the

wall.

2. Pull the thermostat wire through the wallplate

entrance hole.

3. Select the two mounting holes that best fit the

application.

4. Fasten the wallplate to the wall using the anchors

and screws provided.

5. After wiring the wallplate, plug the hole to prevent

drafts from affecting the thermostat; see Wiring

section

Fig. 3. Mounting wallplate to wall.

Table 2. Zone Panel Cross Reference.

TotalZone

(TZ-3)

MABS EZ

(EZ-2, EZ-4)

Mini Zone

(MM - 2, -3) MABS II, IIL

Independent

Zone

T8401C1031 Yes Yes One Oher One Oher

Yes N o Yes No No

5 FEET

[1.5 METERS]

YES

M11338

M12202A

WALL

ANCHORS (2)

WALLPLATE

WHEN USING WALL ANCHORS, DRILL 3/16 INCH

HOLES FOR DRYWALL, 7/32 INCH HOLES FOR

PLASTER OR WOOD.

MOUNTING

SCREWS (2)