Installation Instructions

Power up and bind a Remote Access
Gateway (RFG100)
Connect the Gateway to the power
supply and turn on the power.
To bind the Remote Access Gateway (RFG100)
1
Press and hold the button on the base of the gateway
unit until you see a flashing light next to the
2
On the evohome Controller press
the green bind button
3
You should receive a SUCCESS message on the
evohome Controller (if not go back and re-bind)
Now you need to set up a user account
and download the smartphone app.
Go to www.mytotalconnectcomfort.com and follow the
instructions there.
If the Gateway was in
the Connected Pack
with evohome, it is
already bound and
there is no need to
follow these binding
instructions.
!
If you are NOT
following GUIDED
CONFIGURATION
follow these steps
on your evohome
Controller display first:
1. Press and hold
“Settings”
for 3
seconds
2. Press the green tick
3. Select ADD
GATEWAY
evohome
Controller
1
Remote Access Gateway (RFG100)
18 Step 3: Power up and bind devices