Installation Instructions

Once you’ve completed these steps you’re ready to
start using evo. The user guide gives you instructions for
personalising the settings on the evohome Controller.
You can also make parameter adjustments on your evohome
Controller to match the exact requirements of the heating
system. These can be found in the Installer Menu.
1
On the evohome Controller press and
hold ‘Settings’ for 3 seconds
2
Press the green tick
3
Press PARAMETER SETTINGS and choose
the parameter you want to adjust:
– Internal Sensor Offset
– Cycle Rate
– Minimum On Time
– Fail Safe
– Optimisation
– Hot Water Parameters
For more details on parameters visit
www.evohome.honeywell.com
Parameters and control features
38 Configuration and modification