Installation Instructions

12 Step 2: Set up your Central Controller
Now choose the correct option for
the system you’re installing:
For a Connected Pack* and NO additional
un-bound devices we recommended
pressing ‘Home’ – then go to "Step
4: System test" on page 29.
For a Connected Pack*, PLUS additional
un-bound devices we recommended
pressing ‘Installation Menu’ to add the
un-bound devices and follow "Step 3:
Power up and bind devices" on page 13.
For an un-bound evohome Controller,
PLUS additional un-bound devices
we recommended pressing ‘Guided
Configuration’ to add the un-bound
devices and follow "Step 3: Power
up and bind devices" on page 13.
* A Connected Pack contains devices which are
already bound to the evohome Controller. Choosing
"Guided Configuration" will delete the binding from
evohome Controller and will require to be bound
again.
The Wireless Relay Box (BDR91) in a Connected
Pack is bound as a boiler controller. If you
intend to use it as a Zone Valve or S-Plan/Y-
Plan (Sundial) Valve controller the binding must
be cleared from the Wireless Relay Box first.
Set-up the evohome controller for your system