Installation Instructions

4 Step 1: Wire up the heating system
Turn off at mains and
isolate the supply before
starting
!
If you’re fitting a Wireless Relay Box
(BDR91) to your boiler, zone valve or
Sundial valve
1
Mount the Wireless Relay Box on a non-
metal surface at least 30cm from your boiler,
other wireless devices or metal objects
2
Release the clip on the bottom to open the front cover
3
Follow the wiring diagram (see Appendix: Figures
5-10) to connect the Wireless Relay Box to your
boiler’s thermostat terminals, zone valve or sundial
valve, and to the mains electricity supply
4
Replace the cover
Refer to boiler instruction to locate the room thermostat terminals,
determine if the boiler required a permanent live supply.
Wireless Relay Box (BDR91)
1
4
BOILER
MINIMUM
30CM
REPLACE
FRONT
COVER