Air Cleaner Manual

F114 AND F115 CEILING SURFACE MOUNTED MEDIA AIR CLEANERS
68-0201-3 Revised 06-08
4
Fig. 3. Choose location for air cleaners.
IMPORTANT
When selecting a location, make sure the air
cleaner is secured to ceiling load-bearing supports
or joists. If installing on a T-grid drop ceiling, secure
the air cleaner to the true ceiling.
INSTALLATION
When Installing this Product…
1. Read these instructions carefully. Failure to follow
them could damage the product or cause a hazardous
condition.
2. Check the ratings given in the instructions and on the
product to make sure the product is suitable for your
application.
3. Installer must be a trained, experienced service
technician.
4. After installation is complete, check out product
operation as provided in these instructions.
CAUTION
Electrical Shock Hazard.
Power source can shock.
Do not connect the power source until after the air
cleaner is mounted. This will prevent electrical
shock or equipment damage.
Be sure to turn off the air cleaner before servicing
it.
If the air cleaner must be turned on for an
electrical check, be extremely cautious.
Be cautious when working near the moving parts
of the air cleaner.
Mount and Wire the Air Cleane
rr
rr
r
CAUTION
Eye Exposure.
Harmful dust can obstruct or injure unshielded
eyes.
A CPZ™ module usually releases dust when it is
handled.
Always wear safety glasses when installing or
removing CPZ™ canisters.
DISCHARGE AIR FLOW IN ANY DIRECTION IS ACCEPTABLE.
1
1
MEDIA AIR
CLEANER
AIR SPACE
TO BE
CLEANED
M11694