Install Instructions
MOUNTING
Visually check the installation and make sure that:
• Airflow is in the direction of the arrow on the media air filter cartridge.
• Turning vanes and transitions, if used, are properly installed.
• Joints in sheetmetal between media air filter and furnace are sealed.
• All sheetmetal connections are complete.
• Original furnace filter has been removed and blower compartment is cleaned.
Whenyouhaveveriedthatcheckouthasbeencompleted:
• Replace any access doors removed during the Installation or Checkout.
• Run the furnace or cooling system through one complete cycle to make sure the system operates as desired.
Themedialtermustbereplacedwhenpressuredropacrossthemedialterreaches0.5in.w.c.(0.1kPa),orat
leastannually.Ifthemediaaircleanerisinstalleddownstreamfromanatomizinghumidieroriftheinstallation
includes both heating and cooling, more frequent replacement may be necessary. Clogged media must be
replacedpromptlytoavoidrestrictingairowandreducingefciencyoftheheating/coolingsystem.Recordthe
replacementdateinthespaceprovidedonthereplacementmedialter.
Checkout
Maintenance
Specications
The specications in this publication do not include normal manufacturing tolerances; therefore, an individual
unit may not exactly match the listed specications. This product is tested and calibrated under closely
controlled conditions, and some minor differences in performance can be expected if those conditions are
changed.
Honeywell Media Air Cleaner 68-0239EF—08
8