Specifications

Air Vents and Eliminators
254 customer.honeywell.com 70-6910
SuperVent® Air Eliminator Universal Models
Eliminate Air from Hydronic Heating Systems without Bleeding
Conventional automatic air vents installed in Hydronic heating
systems can leak and cause inefficient system operation. To
effectively eliminate air from the system without bleeding, air
bubbles ned to be vented. The NEW Honeywell SuperVent purges
air through a no clog vent assembly that controls dirt and debris to
minimize air vent fouling.
• No clog vent.
• Dirt and Debris resistant.
• 360 degree adjustable collar ring for installation flexibility.
• Stainless steel concentrator which eliminates gurgling noise.
• Bronze body for rigid construction.
• Threaded connections.
Application: Residential or Commercial closed loop hydronic heating or
chilled water systems
Materials (Body): Bronze
Maximum Operating Temperature: 240 F (115 C)
Maximum Operating Pressure: 125 psi (862 kPa)
Typical Installation
Product Number Pipe Size
Maximum Diameter Dimensions, Approximate
Connection
Type
Connection
Size
Capacity Weight
(inch) (mm) (inch) (mm) (Cv) (lb) (kg)
PVU075 3/4 in. 1 13/16 in. 46 mm 7 9/32 in. long x
2 11/16 in. wide
185 mm long x
68 mm wide
Female NPT 3/4 in. bottom
inlet
3.6 Cv 2.1 lb 0.9 kg
PVU100 1 in. 2 3/32 in. 53 mm 7 27/32 in. high x 4
13/32 in. wide
199 mm high x
112 mm wide
Female NPT 1 in. bottom
inlet
6.2 CV 2.8 lb 1.3 kg
PVU125 1 1/4 in. 2 1/2 in. 64 mm 8 1/4 in. high x
3 11/16 in. wide
212 mm high x
94 mm long
Female NPT 1 1/4 in. bottom
inlet
10.5 Cv 3.6 lb 1.6 kg
PVU150 1 1/2 in. 3 3/32 in. 79 mm 9 13/32 in. high x 4
5/16 in. wide
239 mm high x
110 mm long
Female NPT 1 1/2 in. bottom
inlet
14.3 Cv 5.2 lb 2.4 kg
UNIVERSAL SUPERVENT
INSTALLATION
OUT TO SYSTEM PIPING SYSTEM FILL
OUT FROM BOILER
EXPANSION TANK
DIAGRAM FOR ILLUSTRATION PURPOSES ONLY.
FILL VALVE &
BACKFLOW
PREVENTER
SUPER VENT
M13834