User`s guide

34
To upgrade the firmware in the MS7580:
1. Plug the imager into a serial communication port on the host system.
2. Start the MetroSet2 software.
3. Click on the plus sign (+) next to POS Scanners to expand the supported
imager list.
4. Choose the MS7580 Genesis from the list.
5. Click on the Configure Genesis/7580 Scanner button.
6. Choose Flash Utility from the options list located on the left side of the
screen.
7. Click on the Open File button in the Flash Utility window.
8. Locate and open the flash upgrade file.
9. Select the COM port that the imager is connected to on the host system.
10. Verify the settings listed in the Flash Utility window.
11. Click on the Flash Imager button to begin the flash upgrade. A message
will appear on the screen when the upgrade is complete.