Users Manual

ManualsBrandsHoneywell ManualsNetwork HardwareSMB Gateway

3 31-00426 | Rev.10-20

GENERAL SAFETY

INFORMATION

• When performing any work (installation, mounting,

start-up), all manufacturer instructions and in

particular the Installation and Commissioning

Instructions (EN1B-0205IE10) are to be observed.

• Gateway may be installed and mounted only by

authorized and trained personnel.

• Rules regarding electrostatic discharge should be

followed.

• If the GW-1000-WE/GW-1000-NWE gateway is

modified in any way, except by the manufacturer, all

warranties concerning operation and safety are

invalidated.

• Make sure that the local standards and regulations are

observed at all times. Examples of such regulations are

VDE 0800 and VDE 0100 or EN 60204-1 for earth

grounding.

• Use only accessory equipment which comes from or has

been approved by Honeywell.

• It is recommended that devices be kept at room

temperature for at least 24 hours before applying power.

This is to allow any condensation resulting from low

shipping/storage temperatures to evaporate.

• The GW-1000-WE/GW-1000-NWE gateway must be

installed in a manner (e.g., in a lockable cabinet)

ensuring that uncertified persons have no access to the

terminals.

• Investigated according to United States Standard UL-

60730-1, UL-916, and UL60730-2-9.

• Investigated according to Canadian National

Standard(s) C22.2, No. 205-M1983 (CNL-listed).

• Do not open the GW-1000-WE/GW-1000-NWE

gateway, as it contains no user-serviceable parts inside.

• CE declarations according to LVD Directive

2014/35/EU and EMC Directive 2014/30/EU.

• Product standards are EN 60730-1 and EN 60730-2-9.

Professional Installation

• This device must be professionally installed, this should

be noted on grantee.

• To maintain compliance, only the antenna types that

have been tested shall be used, which listed in “Remote

Antenna Part Numbers” section on page 15. This device

requires a significant technology engineering expertise

towards understanding of the tools and relevant

technology, not readily available to average consumer.

Only a person professionally trained in the technology is

competent.

• This device is not directly marketed or sold to general

public.

Safety Information as per EN60730-1

The GW-1000-WE/GW-1000-NWE gateway is intended for

residential, commercial, and light-industrial environments.

The GW-1000-WE/GW-1000-NWE gateway is an

independently mounted electronic control system with

fixed wiring.

The GW-1000-WE/GW-1000-NWE gateway is suitable for

mounting in fuse boxes conforming with standard

DIN43880, and having a slot height of max. 45 mm.

It is suitable for panel rail mounting on 35 mm standard

panel rail (both horizontal and vertical rail mounting

possible).

The GW-1000-WE/GW-1000-NWE gateway is used for the

purpose of building HVAC control and is suitable for use

only in non-safety controls for installation on or in

appliances.

Regulation (EC) No 1907/2006

According to Article 33 of REACH Regulation, be informed

that this product may contain components with lead (CAS:

7439-92-1) content above the threshold level of 0.1% by

weight.

Table 1. Safety Information as per EN60730-1

Electric Shock

Protection

PELV

Pollution Degree Pollution Degree 2, suitable for use

in industrial environments.

Installation Class 3

Overvoltage