Users Manual

GATEWAY (GW-1000-WE/GW-1000-NWE)
7 31-00424 | Rev.10-20
DIMENSIONS
GW-1000-WE/GW-1000-NWE
GENERAL SAFETY
INFORMATION
• When performing any work (installation, mounting,
start-up), all manufacturer instructions and in
particular the Installation and Commissioning
Instructions (EN1B-0077IE10) are to be observed.
• GW-1000-WE/GW-1000-NWE Gateway must be
installed and mounted only by authorized and trained
personnel.
• Rules regarding electrostatic discharge should be
followed.
• If the GW-1000-WE/GW-1000-NWE Gateway is
modified in any way, except by the manufacturer, all
warranties concerning operation and safety are
invalidated.
• Make sure that the local standards and regulations are
observed at all times. Examples of such regulations are
VDE 0800 and VDE 0100 or EN 60204-1 for earth
grounding.
• Use only accessory equipment that comes from or has
been approved by Honeywell.
• It is recommended that devices be kept at room
temperature for at least 24 hours before applying power.
This is to allow any condensation resulting from low
shipping/storage temperatures to evaporate.
• The GW-1000-WE/GW-1000-NWE Gateway must be
installed in a manner (e.g., in a lockable cabinet)
ensuring that unauthorized persons have no access to
the terminals.
• Investigated according to United States Standard UL-
60730-1,UL-916, and UL60730-2-9.
• Investigated according to Canadian National
Standard(s) C22.2, No. 205-M1983 (CNL-listed).
• Do not open the GW-1000-WE/GW-1000-NWE, as it
contains no user-serviceable parts inside!
• CE declarations according to LVD Directive
2014/35/EU and EMC Directive 2014/30/EU.
• Product standards are EN 60730-1 and EN 60730-2-9.
59 mm
(2.323")
110 mm
(4.331")
45 mm
(1.772")
52 mm
(2.047")
135 mm
(5.315")
145.8 mm
(5.744")