Operation Manual

Rev 1.01 14 900.0355
01/06
AGC
1. Move the cursor ( ) to AGC and press SET. The AGC
Configure Menu will appear.
2. Use the Left and Right keys to select one of the following
AGC values:
• Select one of the 7 limited values (18dB, 22dB,
26dB, 30dB, 32dB, 34dB, 36dB) to limit the
enhanced gain of the AGC circuit.
• Select OFF to close the AGC function.
• Select Sens Up to use a maximum value (38dB) of
AGC gain.
CAM Title
The camera provides text generation on the display monitor.
The CAM Title function can display up to 16 characters on one
line. To enable the camera title:
1. Select ON in the CAM Title and press SET. The Camera
Title Menu will appear.
2. Select the characters needed to enter a Camera Title.
Press SET to enter each character.
3. If necessary, select Position and press SET. Use the
Control keys to change the position of the Camera Title
on the screen. Press SET to confirm the position.
4. Select Back and press SET to save the setting and return
to the Set Up Menu.
White Balance
Follow the preceding sections for information on selecting the
different White Balance options.
WB-Auto (White Balance Auto)
Use this mode to have the color temperature continuously
monitored and thereby have the white balance set
automatically. The color temperature range for the proper
white balance is approximately 2700 – 9100K.
WB-Manual (White Balance Manual)
Use this mode to have the user manually adjust the white
balance. There are R-Gain and B-Gain settings that can be
adjusted independently.
WB-Push
1. Move the cursor to WB-Push.
2. Hold a white surface in front of the camera to use as a
basis for the white balance tracing.