Operation Manual

Rev 1.01 6 900.0355
01/06
Lens Installation
The Day Night Color Camera supports Manual Iris Lens, Video
Iris Lens and DC Auto Iris Lens installation. Use of the
Honeywell IR Corrected Vari-focal Lens or DC Auto Iris Day
Night Lens is recommended for outdoor applications to
preserve an in-focus image in daytime and at night.
Installing Video Auto Iris Lens
The connection terminal is on the rear panel of the camera.
Refer to Figure 5 for the necessary pin assignment to ensure
correct operation.
Recommended wire gauge size F 0.65 mm (AWG22),
Stranded wire: 0.32 mm (AWG22), Element wire: F 0.1 Min.
Figure 5 Video Auto Iris Pin Assignment
Installing DC Auto Iris Lens
The 4-pin connection terminal is on the rear panel of the
camera. Refer to Figure 6 for the necessary pin assignment to
ensure correct operation.
Figure 6 DC Auto Iris Pin Assignment
–
+
RS485
LAMP GND VIDEO +12V GND
VIDEO LENS
Pin Assignment
GND: Shield, ground.
+12V: Power source:
+12VDC, 50 mA Max.
Video: Video Signal Output.
Pin 1 Damp +
Pin 2 Damp –
Pin 3 Drive +
Pin 4 Drive –
Pin 2
Pin 1
Pin 3
Pin 4