Operation Manual

Rev 1.01 11 900.0355

01/06

Function Operations

Synchronization Setting (SYNC)

You can select internal sync mode (INT) or line-lock mode

(LL).

1. Use the Up and Down keys to move the cursor ( ) to

the Sync parameter and use the Right and Left keys to

select line-lock (LL) or internal (INT).

2. If LL is selected, press SET and the Line Lock menu

appears. If INT is selected, the synchronization mode is

automatically set to internal sync and the menu displays

INT.

Line-Lock Sync Mode (LL)

The line-lock mode has its own menu for line-lock vertical

phase adjustment. When the vertical phase adjustment menu

appears on the monitor, use the Right or Left keys to move the

cursor ( ) for phase adjustments. If the camera installation is

relocated, check the vertical phase adjustment again since the

AC line phase may be different.

Note The line-lock (LL) sync mode is not available

when the camera operates on DC power.

Shutter Speed Setting (Shutter)

To select electronic shutter speed, you can select either:

• A manual electronic shutter speed of 1/50 (1/60), 1/120

(1/100), 1/250, 1/500, 1/1000, 1/2000, 1/4000, or 1/10000

seconds.

• Auto Electronics Shutter (AES).

The 1/50 (1/60) sets the shutter to OFF. This function is

effective to raise the sensitivity in low light conditions when

OFF is selected in the Auto Iris Lens field. Move the cursor ( )

to the Shutter parameter and select the electronic shutter

speed. The preset values for Shutter (electronic shutter speed)

change by pressing the Right or Left keys. Selecting AES will

have the camera automatically select an appropriate shutter

speed.