Operation Manual

Document 900.0865 Rev A 21
04/07
Warranty and Service
Subject to the terms and conditions listed on the Product warranty, during the warranty
period Honeywell will repair or replace, at its sole option, free of charge, any defective
product returned prepaid.
In the event you have a problem with any Honeywell product, please call Customer Service
at 1.800.796.CCTV (North America only) for assistance or to request a Return Merchandise
Authorization (RMA) number. For Europe and the United Kingdom, please contact your
Honeywell dealer.
Be sure to have the model number, serial number, and the nature of the problem available
for the technical service representative.
Prior authorization must be obtained for all returns, exchanges, or credits. Items shipped
to Honeywell without a clearly identified Return Merchandise Authorization (RMA)
number may be refused.
Specifications
HCD92534 (NTSC) HCD92534X (PAL)
Operational
Image Sensor 1/3” CCD
Video Standard NTSC PAL
Scanning System 525/60 lines 625/50 lines
Number of Pixels (H x V) 768 x 494 752 x 582
Minimum Illumination 0 lux, operates in complete darkness
Horizontal Resolution Greater than 530 TVL
Video Output 1 Vp-p @ 75 Ohms
Sync System 12 VDC: Internal
24 VAC: Internal/Line lock
S/N Ratio 50 dB or more (AGC off)
Auto Gain Control Off/On, selectable
ALC Adjustable level control
Automatic Electronic
Shutter
1/60–
1/120,000 sec
1/50–
1/120,000 sec
Lens Type 2.8-10 mm Vari-focal Auto Iris, IR corrected, F1.3
Horizontal Field of View 99°–27°
White Balance ATW/AWC/Manual
BLC: Off/On, selectable
Gamma: 0.45
Line Lock Phase
Adjustment
Adjustable Line lock vertical phase