Operation Manual

12
Camera Settings
Camera Functions
Figure 3 Camera Controller
Legend
#Description
1
Video-test monitor output connector
2
LUX-level adjustment DIP switches. Only one switch should be on at a time. They modify the
point at which the lux threshold (level of light) changes the mode of operation (color or B/W).
3
LED-level adjustment screw. Increase (turn clockwise) or lower (turn counter-clockwise) the IR
LED brightness in night (B/W) mode.
4
Camera OSD control (four position plus center push)
Press this control To do this
UP, DOWN Select a new item
LEFT, RIGHT Select a menu item
SETUP (MENU) Access a submenu
LED-LEVEL
VIDEO-TEST
LUX LEVEL
DOWN
UP
LEFT RIGHT
SETUP (MENU)
PUSH DOWN
1
3
4
ON
1 STEP
2 STEP
3 STEP
4 STEP
2
STEP Color to B/W (LED on) B/W to Color (LED off)
1 11–12 lux 12–13 lux
2 8–9 lux 10–11 lux
3 6–7 lux 7–8 lux
4 1–3 lux 3–5 lux