Operation Manual

Document 900.0865 Rev A 5
04/07
Precautions
• Please ensure that your installation area can support the weight of the
camera.
• Do not install the camera in extreme temperature conditions. Only use the
camera where temperatures are between -13°F and 122°F (-25°C and 50°C).
Be especially careful to provide ventilation when operating under high
temperatures.
• Do not aim the camera towards an extreme light source to prevent damaging
the CCD.
• Do not touch the camera bezel (front glass plate).
• Do not drop the camera or subject it to physical shock.
• Do not expose the camera to radioactivity.
• Do not use a strong or abrasive detergent when cleaning the camera.
Caution The light emitted from the near-infrared light emitting diodes provides
illumination over a wide area. This light is not considered a risk to the
unshielded human-eye. However, as with any light source, it is
recommended that normal precautions be taken to avoid unnecessary
exposure. For example, avoid staring into the beam or viewing directly
with optical instruments at close range.
Note IR LEDs could be warm after prolonged use.