Operation Manual

Rev 2 10 G-113078-002
02/07
English
Connecting the Camera
1. Connect the VIDEO connector on the rear of the
camera to the video-in connector on your monitor.
2. Connect the camera to a power supply appropriate for
your installation.
HCM574L, HCM384L, HCM584LX, HCM404LX:
12 VDC or 24 VAC power supply
HCM585LX, HCM405LX: 230V power supply
3. Plug in the power supply. The power (PWR) LED
illuminates to show that the camera is receiving power.
If it does not illuminate, check the connections and the
power source.
Figure 7 Camera Connections
VSD
DC
VIDE O
IRIS
LEVEL
PWR
V- P H
AES
OFF
OFF
INT
AI
BLC
AGC
LL
VSD
DC
VIDEO
IRIS
LEVEL
PWR
V-PH
AES
OFF
OFF
INT
AI
BLC
AGC
LL
CLASS 2 ONLY
Connect to Monitor
Power LED
Mains 230V—Line Voltage
(HCM585LX, HCM405LX)
Low Voltage
(HCM574L, HCM384L,
HCM584LX, HCM404LX)