Operation Manual

Rev 2 4 G-113078-002
02/07
English
Setting Up Your Camera
Figure 3 shows the factory set DIP switch settings.
Automatic Gain Control (AGC) is set ON.
Figure 3 Factory Set DIP Switch Settings
Selecting the Lens
Fixed Lens
Set the AES/AI switch on the rear of the camera (see
Figure 3) to AES.
Vari-focal Auto Iris Lens
Vari-focal Auto Iris lenses (Direct Drive [DC] or Video Drive
[VSD]) are connected to the camera via a 4-pin square
socket located at the side of the camera. Set the AES/AI
DIP switch to AI.
To set a different exposure, see Backlight Compensation
(BLC) on page 5.
Direct Drive (DC) Lens
1. Set the VSD/DC switch on the rear of the camera to
DC. Set the AES/AI DIP switch to AI.
2. Slowly turn the IRIS LEVEL potentiometer until the
picture on the monitor is as clear as possible and is not
too bright.
VSD
DC
VIDEO
IRIS
LEVEL
PWR
V-P H
AES
OFF
OFF
INT
AI
BLC
AGC
LL
IRIS
LEVEL
CLASS 2 ONLY
AES
OFF
OFF
INT
AI
BLC
AGC
LL
VSD
DC
=ON
=OFF
LEGEND
Low Voltage version shown