HCM-6009 Console Humidifier Manual

S T E P 4 : S E T H U M I D I T Y

• You can set your desired humidity in 1% increments anywhere from 25% to 65%.

• To set your desired humidity, press the humidity button ( ) up or down (Fig. 13).

• When the display indicates your desired humidity setting wait 3 seconds.

• After 3 seconds your desired humidity is set and the display will revert back to showing the current

room humidity.

NOTE: If you wish to change your humidity setting or check to see what you set, simply press the humidity

button once and it will show you the set humidity. If you want to

change it, continue to push the button up or down until you have

reached your new desired humidity. Again, after 3 seconds the

display will revert to showing the current room humidity.

• Once you have set your humidity the unit will operate under this

setting until the unit is turned off or your selected humidity is

reached.

• When your desired room humidity has been reached the fan will

shut off and the house icon (

) on the top of your d isplay will

illuminate (Fig. 14). It will stay illuminated until your desired

humidity decreases at which time the fan will turn back on.

NOTE: Your room humidity can often fluctuate. It is normal for

your unit to turn itself on and off throughout the day as it is

monitoring your changing environment.

To go back to continuous mode, turn your unit off and then

back on and select your desired output setting (see step 2).

Digital EasySet

™

Control Operation (Model HCM-6012 & HCM-6012-CST) (Continued)

Fig. 13

Fig. 14

NOTE: To ensure proper humidity in your home, you should use a

hygrometer (room humidity indictor) such as the E-10 and place across

the room from your humidifier.

(Hygrometer sold separately)