Datasheet

ManualsBrandsHONEYWELL ManualsHeating Control Systemsevohome Wireless indoor thermostat

HCW82

WIRELESS ROOM THERMOSTAT

PRODUCT DATA

FEATURES

• Individual room temperature control. The HCW82 is

communicating with the underfloor heating controller

e.g. HCE80 to keep the room temperature constant

• Simple binding operation to reduce installation time

• Local setpoint override because simple analogue

interface. Adjustment +12°C to -12°C.

• Window contact optional connectable wired (HCA30)

• Battery powered or external power supply possible

• Remote access to the radiator controller HR 80 with

HCM200D. The setpoint of the HR80 can be adjusted

with the HCW82 the room temperature sensor of the

HCW82 is used.

• HCW82 used as room thermostat with HCM200D. The

relays HS20/HS30 are switched ON/OFF depending on

the room temperature

• Room temperature control combined with the shading

function for shutter control with HCM200D

GENERAL

The wireless room thermostat HCW82 is used for individual

room temperature control. The HCW82 is communicating with

the underfloor heating controllers HCE80/HCE80R/HCC80/

HCC80R and the Hometronic Manager HCM200D. The

setpoint can be easily adjusted from -12°C to + 12°C

because the user friendly analogue interface. The HCW82

measures the room temperature and sends the value as

offset temperature to the underfloor heating controller e.g.

HCE80 and/or to the HCM200D in order to keep the room

temperature constant.

For energy saving it can also send the status of the window

contact to the HCM200D if it is installed.

SPECIFICATIONS

ELECTRICAL

Operating Voltage : With 2 x AAA Alkaline Batteries

(included) or external 3 ± 10%

voltage, min. current 25 mA

RF Communication

RF band : 868,3 MHz Transmitter

Receiver class : 2

RF communication range : 30m in a residential building

environment

RF communication : short, high rate transmission to

Technology minimize air time and avoid

collisions

ENVIRONMENTAL and STANDARDS

Temperature setpoint

range (offset) : -12 to +12 ºC

Storage temperature : -20 … +70 ºC

Operating temperature : 0 … +40 ºC

Temperature sensing

element : NTC 20 kΩ

Dimensions (HxWxD) : 103 x 99x 30 mm

Humidity : max. 5 … 93 %

IP class : IP30

Compatible products : HCE80, HCE80R, HCC80,

HCC80R, HCM200D

Approval : CE

EN0H0502GE51 R0805

Summary of content (4 pages)

PAGE 1
HCW82 WIRELESS ROOM THERMOSTAT PRODUCT DATA GENERAL The wireless room thermostat HCW82 is used for individual room temperature control. The HCW82 is communicating with the underfloor heating controllers HCE80/HCE80R/HCC80/ HCC80R and the Hometronic Manager HCM200D. The setpoint can be easily adjusted from -12°C to + 12°C because the user friendly analogue interface. The HCW82 measures the room temperature and sends the value as offset temperature to the underfloor heating controller e.g.
PAGE 2
HCW82 APPLICATION EXAMPLES Application A Underfloor heating without time program. The HCW82 must be allocated to the individual zone to be controlled. HCW82 is sending the room temperature and setpoint offset to the underfloor controller.
PAGE 3
HCW82 Application B HCF 82 HCW 82 CM67z Up to 8 zones HRA80 Antenna for HCE80 HCE80R Pump control Underfloor heating with and without time program . The room unit CM67z can control up to 2 zones with individual time program. Only the zone 1 of the CM67z includes the room sensor for zone 2 the HCF82 must be additional allocated for the room temperature measurement to the same zone of the underfloor heating controller.
PAGE 4
HCW82 Application C CM67z HCW 82 Communication between underfloor Heating controllers and peripheral devices Communication 868,3 MHZ int tpo p. tem e 1 om z on Ro ly On Se Setpointoffest Room temp. HCM200D HRA80 Antenna for HCE80 HCE80R Setpoint HR80 Pump control S R etp oo o m int te m p. Underfloor heating controller HCE80/HCE80R/HCC80/HCC80R Automation and Control Solutions Honeywell AG Boeblinger Strasse 17 D-71101 Schoenaich Phone: (49) 7031 63701 Fax: (49) 7031 637493 http://europe.