EQUIP™ Series Indoor Fixed Mini Dome Network Camera NTSC / PAL HD3MDIP HD3MDIPX User Guide Document 800-04132V1 – Rev A – 01/10
Revisions Issue Date Revisions A 09/09 New document for HD3MDIP/X release. Generally describes the functionality in the firmware of the HD3MDIP/X camera. V1 A 01/10 New version number and release date.
HD3MDIP/X Network Camera Reference Guide Contents Figures. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Tables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 About This Document . . . . . . . . . . . . . . . . . . . . . . . . Overview of Contents. . . . . . . . . . . . . . . . . . . . . . . Cautions and Warnings . . . . . . . . . . . . . . . . . . . . . FCC Compliance Statement . . . . . . . . . .
Contents Step 5: Launch the Web-Client to View Live Video . . . . . . . . . . Uninstalling IP Utility, Bonjour or the ActiveX Plug-in Software . . . . Uninstalling IP Utility Using the Start Menu . . . . . . . . . Uninstalling IP Utility or IP ActiveX Using the Control Panel . 4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38 . 40 . 41 . 41 IP Camera Web-Client . . . . . . . . . . . . . . . . . .
HD3MDIP/X Network Camera Reference Guide Figures Figure 2-1 HD3MDIP/X Camera Components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 Figure 2-2 Mounting Template . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 Figure 2-3 Audio and Alarm PINs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 Figure 2-4 Normal Alarm States . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Figures 6
HD3MDIP/X Network Camera Reference Guide Tables Table 1-1 Fixed Mini Dome Network Camera Model Numbers . . . . . . . . . . . . . . . . . . . . . . 13 Table 2-1 Audio and Alarm Connector PIN Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . 19 Table 3-1 User Profiles for Honeywell IP Utility and the Web-Client . . . . . . . . . . . . . . . . . . . 30 Table 3-2 PC Minimum System Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Tables 8
HD3MDIP/X Network Camera Reference Guide About This Document This document introduces the Honeywell HD3MDIP/X True Day/Night Indoor Network Camera. It covers how to install and operate the HD3MDIP/X in a network environment. This document is intended for system installers, administrators, and operators.
Cautions and Warnings RISK OF ELECTRIC SHOCK DO NOT OPEN THIS SYMBOL INDICATES THAT DANGEROUS VOLTAGE CONSTITUTING A RISK OF ELECTRIC SHOCK IS PRESENT WITHIN THE UNIT. CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER. NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. THIS SYMBOL INDICATES THAT IMPORTANT OPERATING AND MAINTENANCE INSTRUCTIONS ACCOMPANY THIS UNIT.
HD3MDIP/X Network Camera Reference Guide If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference. For example, try reorienting or relocating the receiving antenna, increasing the separation between the equipment and receiver, or connecting the equipment to an outlet on a different circuit.
Prior authorization must be obtained for all returns, exchanges, or credits. Items shipped to Honeywell without a clearly identified Return Merchandise Authorization (RMA) number may be refused.
1 Introduction Honeywell HD3MDIP/X color network cameras provide high picture quality remote video surveillance over a network connection. See Table 1-1 for descriptions of the camera models. Table 1-1 Fixed Mini Dome Network Camera Model Numbers Model number Description HD3MDIP True Day/Night 720p, 3.3 – 12 mm VFAI Lens NTSC HD3MDIPX True Day/Night 720p, 3.
Introduction 14
2 Installation and Setup This chapter describes how to: • • • Mount the camera Adjust the camera for the clearest image Set up the camera in a network system Before You Begin Please carefully read this guide before you install the HD3MDIP/X network camera. Keep this guide for future reference. Before installing the camera, Honeywell recommends that you check www.honeywellvideo.com/products/cameras/ to find your camera and download the latest manuals and software updates.
Installation and Setup If any parts are missing or damaged, contact the dealer from which you purchased your camera or call Honeywell Customer Service (see Warranty and Service). Equipment Required The following tools might help you to complete the installation: • • • Drill Screwdrivers Wire cutters Overview of Installation Procedure Note Please familiarize yourself with the installation procedure and complete each step in the exact sequence given.
HD3MDIP/X Network Camera Reference Guide Camera Components and Functions The HD3MDIP/X Network Camera consists of a fully-integrated enclosure with camera and lens. The wiring can be completely concealed to reduce the risk of tampering.
Installation and Setup Camera Installation Preparing the Camera 1. Rotate the bubble counterclockwise until it disconnects. 2. Pull the turret to remove it. 3. Rotate the camera counterclockwise until it disconnects from the skirt. 4. Set aside the bubble, turret, and camera. Skirt Camera Turret Bubble Preparing the Mounting Surface 1. Mark the mounting surface for screw holes and wire access hole. • • Use the mounting template if you are surface mounting your camera.
HD3MDIP/X Network Camera Reference Guide 2. Pre-drill the holes as indicated on the template, using the recommended hole size for the screws being used. Note Other fasteners (preferably stainless steel) can be used, provided they are not larger than the screw holes on the mounting template. Connecting the Wires Connecting Audio and Alarms 1. Pull the wires through the ceiling or wall hole until you have at least 4 inches of wire. 2.
Installation and Setup the client (PC) and provide an industry standard line level output suitable to connect to audio devices. Audio input and output have 600 Ohm impedance. See Audio Settings on page 63 to configure audio options. Connecting Alarms WARNING! Do not exceed the maximum rating of 12 VDC, 0.5 A on alarm output connections. The HD3MDIP/X network camera has one alarm input and one alarm output.
HD3MDIP/X Network Camera Reference Guide Connecting Power WARNING! Note 1. The use of a CSA Certified/UL Listed Class 2 power supply is required to ensure compliance with electrical safety standards. Check the power source from the external power supply before applying power to the camera. Connect the appropriate power supply for your installation: • • Note 24 VAC power supply (proceed to step 2) or Power over Ethernet (IEEE 802.3af) 48 VDC power supply If you are using PoE (802.
Installation and Setup Figure 2-6 Camera and Cables RJ45 Ethernet network connection (using 10Base T or 100Base TX cable). See Connecting to a Network via an RJ-45 Ethernet Connector, page 23) Also for Power over Ethernet (PoE 802.
HD3MDIP/X Network Camera Reference Guide Caution Installation must be performed by a qualified electrician. The power wire size for the distance and the number of cameras must be determined to maintain 24 VAC at each camera. Connecting to a Video Monitor The local video out (see Figure 2-7) is available as a test output and should be used as needed during installation to position, aim, and focus the camera.
Installation and Setup Mounting the Camera Surface Mount 1. 24 Secure the skirt to the ceiling or wall using the appropriate screws (supplied). 2. Connect the wires (see Connecting the Wires on page 19). 3. Rotate and align the camera assembly yellow label with the skirt yellow label. 4. Secure the camera assembly to the skirt by pushing it into the skirt, then twisting it clockwise until it clicks securely in place. Skirt Screws (supplied) Camera assembly Turret 5.
HD3MDIP/X Network Camera Reference Guide Flush Mount (with or without 4S box) 1. Use the screws (supplied) to connect the adapter plate directly to the ceiling or wall. Or Use your own screws to connect the adapter plate to the 4S box (not supplied) which is attached to the ceiling or wall. 2. Connect the wires (see Connecting the Wires on page 19). 3. Secure the camera assembly to the adapter plate by twisting clockwise until it clicks securely in place. 4.
Installation and Setup 3. Adjust the gimbal assembly to the desired view. 4. Re-tighten the locking screw to lock the gimbal assembly in place. Note Orient the camera as shown in Figure 2-8 to maintain the correct picture orientation.
HD3MDIP/X Network Camera Reference Guide Securing the Enclosure Cover Install the bubble when you have set up your camera and completed the network connections (see Chapter 3, Installing the Honeywell IP Utility and HD3MDIP/X Web-Client Software). Place the enclosure cover on the camera with the tabs to the left of the slots, then turn it clockwise until the tabs click securely into place.
Installation and Setup 28
3 Installing the Honeywell IP Utility and HD3MDIP/X Web-Client Software This chapter describes how to: • • • • Install and log onto the IP Utility Connect to a device and configure network settings using the IP Utility Launch the Web-Client software Uninstall the IP Utility, Bonjour, or ActiveX software About the Honeywell IP Utility and Web-Client About the Honeywell IP Utility The Honeywell IP Utility is a software application that is installed from a CD or downloaded from the Honeywell Systems Group w
Installing the Honeywell IP Utility and HD3MDIP/X Web-Client Software About the Web-Client The Web-Client is the web-based application that enables users to: • • • • • • View live-streaming video. View the device network settings and firmware details. Configure camera settings Configure video analytics settings. Configure compression settings. Configure alarm and audio settings.
HD3MDIP/X Network Camera Reference Guide Step 1: Confirm Your System Requirements Note Windows administrator privileges are required to install the Honeywell IP Utility and associated software. Note Contact the network administrator if there are any questions regarding the local area network (LAN) or any other network related issues. Install the Honeywell IP Utility on a work station with the minimum requirements (outlined in Table 3-2).
Installing the Honeywell IP Utility and HD3MDIP/X Web-Client Software Step 2: Install the Honeywell IP Utility Software 1. Close all other applications that might be open on your computer. 2. Open the Honeywell IP Utility InstallShield Wizard. Method 1: CD Insert the CD into the CD-ROM drive. Note If InstallShield does not open automatically, navigate to [CD drive]\Honeywell IP Utility\Honeywell IP Utility Setup.exe. Double-click on the file to launch the program. Method 2: Website 3. a.
HD3MDIP/X Network Camera Reference Guide Step 3: Log Onto the IP Utility and Discover Network Devices 1. Double-click the Honeywell IP Utility icon on your desktop. -ORClick Start ➤ Programs ➤ Honeywell Video Systems ➤ EQUIP Series ➤ IP Utility ➤ Honeywell IP Utility. The Honeywell IP Utility Log On window opens. Figure 3-2 Honeywell IP Utility Log On Window 2. Select Administrator or Guest from the User Name drop-down list. 3. Enter the case-sensitive password in the Password field.
Installing the Honeywell IP Utility and HD3MDIP/X Web-Client Software Figure 3-3 Refresh button Disconnect button Honeywell IP Utility User Interface Use the Product Filter drop-down menu to select a specific device, such as all HD3MDIP/X cameras Connect button Limited/No connectivity button The About menu displays the software version installed From the User tab, Administrators can change the Web-Client user passwords IP Network Setting assigns network settings automatically or manually The Discove
HD3MDIP/X Network Camera Reference Guide You can also manually refresh the device discovery by clicking the Discovery icon ( located near the top of the Discovery pane. ), Connecting to or Disconnecting From Devices Before configuring the IP network settings, you must connect to the IP device. Connecting to a Device You can connect to individual Web-Client applications for each discovered device. • In the Discovery pane, double-click the device to which you want to connect.
Installing the Honeywell IP Utility and HD3MDIP/X Web-Client Software Table 3-4 IP Network Device Setting Options Option Description Device Name By default, the device name is the device type plus the MAC Address. Honeywell recommends, for security, that you change the device name. IP Address The IP address of the device on the network.The camera obtains an IP address by static or dynamic (automatic) means.
HD3MDIP/X Network Camera Reference Guide Updating IP Network Settings Automatically 1. In the Discovery pane, select the device and click Connect . 2. From the System tab click the Obtain an IP Address automatically check box. 3. Enter a Device Name, for example, FrontLobbyDome01. 4. Click Apply. The network automatically assigns the IP Address based on the DHCP network server details. If no DHCP server is present on the network, the hardware defaults to an APIPA address (169.254.x.x).
Installing the Honeywell IP Utility and HD3MDIP/X Web-Client Software Interfacing with the EQUIP Device Via a Network Video Recorder Your recording vendor has the option of using either the connection methods supported by EQUIP V1 firmware or EQUIP V2.1 firmware. If the NVR vendor has implemented EQUIP V1 connection methods, the HD3MDIP/X camera will work on those NVRs. Similarly, if the NVR vendor has implemented EQUIP V2.1 connection methods, the HD3MDIP/X camera will work on those NVRs.
HD3MDIP/X Network Camera Reference Guide 2. Select a User Name and enter a Password. a. From the User Name drop-down list, select Administrator or Guest. b. In the Password field, enter the case-sensitive password. c. 3. • The default Administrator password is 1234. • The default Guest password is guest. Click . A signed version of ActiveX® control is installed when you use the Web-Client to discover connected devices for the first time.
Installing the Honeywell IP Utility and HD3MDIP/X Web-Client Software Figure 3-6 Web-Client Interface After Logging On Uninstalling IP Utility, Bonjour or the ActiveX Plug-in Software You can uninstall the IP Utility, Bonjour, or IP ActiveX software using: • The Start menu to uninstall IP Utility and Bonjour OR • 40 The Control Panel to uninstall IP Utility, Bonjour and IP ActiveX.
HD3MDIP/X Network Camera Reference Guide Uninstalling IP Utility Using the Start Menu 1. Click Start ➤ All Programs ➤ Honeywell Video Systems ➤ EQUIP Series ➤ IP Utility ➤ Uninstall Honeywell IP Utility. 2. Click Yes. The Honeywell IP Utility is uninstalled. 3. During the uninstallation process, you are prompted to also uninstall the Bonjour program. Click Yes to remove Bonjour or No to only uninstall the Honeywell IP Utility. 4. Click Finish.
Installing the Honeywell IP Utility and HD3MDIP/X Web-Client Software 42
4 IP Camera Web-Client Before you launch the Honeywell IP Web-Client, ensure that you complete the following sections before configuring your HD3MDIP/X camera: • • Chapter 2, Installation and Setup Chapter 3, Installing the Honeywell IP Utility and HD3MDIP/X Web-Client Software This chapter covers: • • • • • • Navigating the Web-Client interface Understanding the Web-Client features and functions Configuring compression settings Configuring camera settings Setting tamper detection Configuring audio and a
IP Camera Web-Client User Profiles Table 4-1 describes the roles and privileges for the HD3MDIP/X Web-Client application users: Table 4-1 User Roles and Privileges User Role Privileges Administrator • • • • • View video and network settings Configure the alarm and audio settings Set up the video compression settings Configure auto exposure and white balance for the camera Set up camera sabotage and video motion detection settings Note Only 1 Administrator can be logged on at a time Guest Operator •
HD3MDIP/X Network Camera Reference Guide Launching the Web-Client from IP Utility 1. From the desktop, double-click the Honeywell IP Utility icon . -ORClick Start ➤ All Programs ➤ Honeywell Video Systems ➤ EQUIP Series ➤ IP Utility ➤ Honeywell IP Utility. The Honeywell IP Utility Log On window opens. 2. From the User Name drop-down list, select Administrator or Guest. See Table 4-1 on page 44 for User roles and privileges. 3. In the Password field, enter the case-sensitive password.
IP Camera Web-Client Logging Onto the Web-Client from Internet Explorer 1. From Internet Explorer (v6.0+), enter the URL (IP address of the device) in the Address bar to open the logon window. The Web-Client log on page opens. 2. Select a User Name and enter a Password. a. From the User Name drop-down list, select Administrator or Guest. b. In the Password field, enter the case-sensitive password. c. 3. • The default Administrator password is 1234. • The default Guest password is guest.
HD3MDIP/X Network Camera Reference Guide Note Do not use the CLOSE button ( )in Internet Explorer to logout or the session might not end correctly, and settings that have you changed might not be saved. Navigating the User Interface Figure 4-2 Web-Client Window Layout: Administrator Log On The URL corresponds to the HD3MDIP/X IP Address as configured in the IP Utility. If logged on as a Guest, only the Live View tab is available. Administrators can access all tabs.
IP Camera Web-Client The HD3MDIP/X Web-Client application user interface consists of multiple user-friendly views organized by function. Access to the views is user-controlled. Table 4-2 Tabs/Views in the Web-Client Application Tab Enables you to... Live View View video. Device Information View the network settings and firmware details of the camera. Compression Settings Configure the compression.
HD3MDIP/X Network Camera Reference Guide Figure 4-4 Web-Client: Guest User Logging on as a Guest limits users to Live View tab functions only. See Live View for more details. When an alarm is detected, an alarm message appears here to notify an operator. Live View Live View shows live video from the selected camera (see Figure 4-4). Device Settings The Device Settings tab allows you to view the network settings and firmware details of the camera.
IP Camera Web-Client IP and Firmware Settings on the Device Information Tab Depending on the hardware installation, there is a tab called either Device Information or Device Settings. In both cases, the IP and Firmware Settings panel mirrors the information available in the Honeywell IP Utility. It provides read–only network settings, firmware settings, and video formats without having to access the IP Utility. The Device Settings are the same for the Primary and Secondary streams.
HD3MDIP/X Network Camera Reference Guide Figure 4-6 IP and Firmware Settings: Device Information Tab Device Name as entered in the IP Utility program IP Address on the network (DHCP/Static/APIPA) Subnet Mask and Default Gateway address that connects the camera to the network MAC Address is a factory assigned address unique for each device Firmware Settings including product name and version Video Format - NTSC or PAL Compression Settings The video signal sent from the camera to the Web-Client has a nu
IP Camera Web-Client Figure 4-7 Compressions Settings Tab: Primary Stream Your HD3MDIP/X camera provides dual simultaneous video streams. Although the Primary stream can support a single MPEG4 SP in real time 30 fps at 720p resolution, it must be set to less than 720P for the second stream to operate. The Secondary stream operates at a lower frame rate than the Primary stream.
HD3MDIP/X Network Camera Reference Guide Configuring the Compression Settings 1. On the Compression Settings tab, in the Statistics area, select the Received check box to receive in real time the bit rate and frame rates for the current image. Deselecting the check box disables the refresh rate. Note 2. The Received check box is disabled by default. When you log out, this check box reverts to the disabled state. Use Table 4-3 to set up the video compression.
IP Camera Web-Client Figure 4-9 Video Codec Settings, Quality Priority Selected Set the Resolution for NTSC or PAL video signals. Statistics are received for the current image in real time when Received is enabled. 3. Click Apply. Adjustments in your compression settings are captured in the statistics. As you make adjustments, the Statistics field acts as a visual reminder of how your settings affect the bit rate, frame rate, and bandwidth usage. 4.
HD3MDIP/X Network Camera Reference Guide Camera Setup The Camera Setup view provides access to the settings used to configure the camera configurations for both Primary and Secondary streams. The following section explains Auto Exposure and White Balance setup. Note You must click Apply after you make changes to any settings to save those changes. Settings are not saved unless you click Apply.
IP Camera Web-Client Note You must click Apply after you make changes to any settings to save those changes. Settings are not saved unless you click Apply. Table 4-4 Auto Exposure Settings Setting Options ALC (Automatic Light Compensation) DC Iris Level: 1–25 For an automatic iris lens. Adjust the DC Iris Level until the image is neither too bright nor too dark. AGC (Automatic Gain Off, 10 dB–40 dB Control) Description Adjust the maximum value of AGC gain.
HD3MDIP/X Network Camera Reference Guide White Balance White Balance ensures that color integrity is maintained in the camera image by compensating for the temperature color “casts” that different light sources can cause. Use Table 4-5 to set up White Balance options. Note Table 4-5 You must click Apply after you make changes to any settings to save those changes. Settings are not saved unless you click Apply.
IP Camera Web-Client Figure 4-11 Video Analytics Tab Each Tamper Detection Setting provides 3 threshold levels: High (80%), Medium (50%) and Low (30%). Each setting has three threshold levels: high (80%), medium (50%) and low (30%). When these thresholds are exceeded, camera sabotage or motion is detected, and alarm messages appear above the video display and alarm signals are sent to DVRs/NVRs (see Figure 4-13).
HD3MDIP/X Network Camera Reference Guide There are three types of sabotage detection in the Tamper Detection Setting tab on the Video Analytics tab: blinding the camera, blurring the video display, and tampering with the camera field of view.
IP Camera Web-Client Configuring Camera Blinding Detection An obstacle in front of the camera lens can blind the camera. When this occurs, camera blinding is detected and an alarm message appears above the video display (see Figure 4-13). To detect camera blinding: 1. Click the Video Analytics tab. 2. In the Blinding Threshold list, select one of the following options: Table 4-7 3. Blinding Threshold Values Value To detect … High (80%) Maximum blinding.
HD3MDIP/X Network Camera Reference Guide 2. In the Scene Change Threshold list, select one of the following options: Table 4-8 Scene Change Threshold Values Value To detect … High (80%) Maximum change in the camera field of view. The alarm message appears when tampering causes at least an 80% change in the HD3MDIP/X camera field of view. Medium (50%) Medium change in the camera field of view.
IP Camera Web-Client Figure 4-14 Video Analytics: Defining a Region Region-defining box Note To disable a zone, click the VMD drop-down menu, then select Disable. Alarm and Audio Alarm Settings Connect external devices such as sirens or flashing lights to the alarm output connector to signal users of the camera that an alarm is activated. Set the Alarm Output as Normally Open or Normally Close. See Connecting Alarms on page 20 for more information.
HD3MDIP/X Network Camera Reference Guide Audio Settings The network camera supports bi-directional audio. There are two supported voice band channels that function in full duplex mode. Connect industry-standard line level audio input and output to the back of your camera. See Connecting Alarms on page 20 for more information. Audio configuration for your network camera is straightforward.
IP Camera Web-Client 64
A Mounting Template HD3DIP/X Mounting Template Apply to clean, dry surface, free of dust and dirt 6 Holes Use recommended drill bit as per screws (supplied) Document 800-04132V1 Rev A 01/10 65
Mounting Template 66
B Troubleshooting Technical Support Prior to calling Honeywell technical support, refer to the following topics for possible solutions to problems with your HD3MDIP/X camera. To contact the Honeywell Video Systems technical support team, call 1-800-796-2288 (North America only) or send an e-mail to HVSsupport@honeywell.com. Any equipment returned to Honeywell Video Systems for warranty or service repair must have a Return Merchandise Authorization (RMA) number.
Troubleshooting Problem: Live View Does Not Display the Expected Video Possible solutions: • • • Ensure that your web browser settings have been configured to allow ActiveX controls (see Installing the Honeywell IP Utility and HD3MDIP/X Web-Client Software on page 29 for information on setting up your browser). Ensure that the network cable from the camera is connected to both the camera and the network. Ensure that the camera assembly board DIP switch settings are configured correctly.
C Specifications Note These specifications refer to all models, except where otherwise noted. Specifications are subject to change without notice. Video Signal Specifications NTSC PAL Scanning System: Progressive Image Sensor: 1/4” CMOS Number of Pixels (H x V): Minimum Illumination: Video Output (local): S/N Ratio: Auto Gain Control (AGC): Auto Electronic Shutter (ELC): Automatic Lens Iris Control: White Balance (AWB): Lens Type: 1280 x 720 1.0 lux color @ 50 IRE, F1.2 1.
Specifications Environmental Temperature: Operating: 14°F to 122°F (-10°C to 50°C) Storage: -4°F to 140°F (-20°C to 60°C) Relative Humidity: 0% to 85%, non-condensing IP Specifications Video Compression: MPEG-4, MJPEG Resolutions: HD: SVGA: VGA: QVGA: 1280 x 720 800 x 600 640 x 480 320 x 240 Software Update: Field Upgradeable Frame Rate NTSC/PAL: Up to 30/25 fps video in all resolutions Video Streaming: Dual Streaming: MPEG-4 and MJPEG Controllable frame rate and bandwidth Constant or variabl
HD3MDIP/X Network Camera Reference Guide Figure C-2 HD3MDIP/X Side View Dimensions without Skirt 4.5” (115.7 mm) 1.5” (38.2 mm) 3.9” (97.7 mm) Figure C-3 HD3MDIP/X Side View Dimensions with Adapter Plate 1.2” (28.5 mm) 6.4” (161.5 mm) Figure C-4 HD3MDIP/X Bottom View with Dimensions 3. 2” 3. 50 ( 82. 5 mm ) ” (8 9.0 m m) 1. ( 46. 8” 0 mm ) ∅ 2.88” (73.10 mm) 4.9” (125.
Specifications 72
D Glossary AGC (Automatic Gain Control) Video Amplifier in a camera that boosts the amount of video gain (including the noise) to maintain a 1V p-p (1-volt peak-to-peak) video signal output. It becomes operational when the light level is low. The circuit is designed to compensate for fluctuations in scene illumination which would cause the video output level to be too low. If the video level (scene illumination) is adequate, the circuit does not apply any gain to the signal.
Glossary PAL (Phase Alternate Line) A standard of specifications for television transmission for color TV signals used in West Germany, England, Holland, Australia, and several other countries. It uses an interlaced format with 625 lines per frame at 25 frames per second. PoE (Power over Ethernet) A system designed to transmit electrical power, along with data, to remote devices over a standard twisted pair cable in an Ethernet network.
HD3MDIP/X Network Camera Reference Guide Index A ActiveX control 39 administrator privileges 30 administrator password, default 33 AGC (Automatic Gain Control) 56 AGC (automatic gain control) 56 alarm configuration 62 alarm output settings 62 alarm settings 62 alarms, connecting 20 ALC (automatic light compensation) 56 APIPA address 36, 37, 51 audio connections 19 audio configuration 63 audio connections 19 audio settings 63 auto configuration, IP network 35–37 device discovery 33, 37 log out, IP Utility 3
audio, alarm 19 CAT5 Ethernet 23 video monitor 23 customer service 11 guest password, default 33 guest user privileges 30 D HTTP server 33 DayToNight 56 declaration of conformance 11 default passwords 33 default gateway 36 defaults, restore factory 25 device connecting 35 disconnecting 35 discovering 33, 37 information tab 50 name 36 DHCP address 36, 37, 51 digital noise reduction 56 digital slow shutter 56 disconnect button 34 disconnecting, from IP Utility 35 DNR 56 DSS 56 I E EQUIP series manuals 3
HD3MDIP/X Network Camera Reference Guide M MAC address 36, 37, 51 manual white balance mode 57 manual, configuration, IP network 35–37 maximum bit rate 53 maximum bit rate, setting 51 motion detection 61 mounting template 18, 65 mounting, template 18 MWB (manual white balance) mode 57 N netmask 36 NightToDay 56 normally closed 20 normally open 20 NTSC video format 51 video resolution 52 NTSC, video resolution 54 O opening an IP Web-Client 44 operating system 31 P PAL video format 51 video resolution 52
analytics tab 57 format 51 viewing live 47 video analytics 57 blinding threshold 60 blur threshold 59 camera blinding 60 field of view change 60 motion detection 61 sabotage detection sabotage detection 58 scene change threshold 60 tamper detection 59 video blurring 59 video blurring 59 video monitor, connecting 23 video motion detection 61 VMD 61 78 W warnings 10, 21 warranty 11 web browser 31 web client compression settings 51 web-client description 30 launching and logging on/off 38 user types 30 websi
Honeywell Security Group (Head Office) 2700 Blankenbaker Pkwy, Suite 150 Louisville, KY 40299, USA www.honeywellvideo.com ℡ +1.800.796.2288 Honeywell Security Group Northern Europe Ampèrestraat 41 1446 TR Purmerend, The Netherlands www.honeywell.com/security/nl ℡ +31.299.410.200 Honeywell Security Group Europe/South Africa Aston Fields Road, Whitehouse Industrial Estate Runcorn, Cheshire, WA7 3DL, UK www.honeywell.com/security/uk ℡ +44.01928.
