Home-Resideo TrueEASE Installation Manual

MOUNTING

Whether you purchased a Bypass or Fan humidier will determine how your humidier will be installed:

Which humidier do you have?

Bypass:

Bypass humidiers use the pressure difference

between the supply and return to move duct

air through the humidier. Access to both the

supply and return are required. The bypass

humidier can be positioned on either the

supply or return duct.

MCR29871

Fan:

Fan humidiers use the fan inside the humidier

to pull duct air through the humidier. Honeywell

strongly recomends mounting the HE300 on

the supply duct for maximum humidication

capacity. If a return duct installation is required,

a trap must be installed in the drain line. A hard

trap is recommended, but a coil in the line,

secured with tape or zip tie, is also acceptable.

See Water Supply and Drain Connections

section for details.

MCR29929

Choosing a Mounting Method

Before beginning Mounting:

I have conrmed local codes for proper plumbing practices.

I have chosen an installation location that meets the requirements on page 4.

Humidier 69-2413EF—09