Installation Guide

INSTALLATION INSTRUCTIONS
69-2633ES-03
Automation and Control Solutions
Honeywell International Inc.
1985 Douglas Drive North
Golden Valley, MN 55422
customer.honeywell.com
® U.S. Registered Trademark
© 2011 Honeywell International Inc.
69-2633ES—03 M.S. Rev. 07-11
Printed in U.S.A.
HE220, HE260 Humidifier
Installation Kit
APPLICATION
This installation kit contains all the parts necessary to install
your new Honeywell HE220 or HE260 Humidifier.
INSTALLATION
Please see www.yourhome.honeywell.com for complete
installation instructions and owner’s manual.
Preparing for the Installation
Be sure to identify all the required (Table 1) accessories
(included) and make sure the appropriate tools are available
before beginning the installation.
Included Accessories
Required Tools
Tools required for installation include:
• Tin snip.
• Screwdriver.
• Adjustable or open-end wrench.
• Drill, punch or awl.
• Level.
Table 1. Included Accessories.
Quantity Accessory
6 ft (1.85M) Bypass ducting including:
6 in. (155 mm) diameter flexible duct
Starter collar
Summer shut-off damper
Duct tape
20 ft (6.2m) 18 gauge, two-strand thermostat wire
20 ft (6.2m) 1/4 in. (6.35 mm) OD feed water tubing
10 ft (3.1m) 1/2 in (12.7 mm) ID drain tubing
1 bag Connecting and mounting hardware:
Wire nuts (4)
No. 8 sheet metal screws (18)
Drain tube clamps (2 sizes)
Feed tube mounting clamps (6)
Brass inserts (2)
Plastic compression rings (2)
This is a legacy product document
supported by Resideo. It is no
longer manufactured