Installation Instructions
Table Of Contents
- Welcome
- application
- Preparing for the Installation
- installation
- Wiring
- TESTING HUMIDIFIER OPERATION
- operation
- maintaining your humidifier
- TROUBLESHOOTING your HUMIDIFIER
- Limited One-Year Warranty
- BIENVENIDO
- APLICACIÓN
- Preparación para la instalación
- Instalación
- Cableado
- PRUEBA DE FUNCIONAMIENTO DEL HUMIDIFICADOR
- FUNCIONAMIENTO
- MANTENIMIENTO DE SU HUMIDIFICADOR
- Localización y solución de problemas
- Limited One-Year Warranty
HE240, HE280 HUMIDIFIER AND INSTALLATION KIT
19 69-2685ES—01
Low
humidity
Furnace blower
not operating.
• Reset circuit breaker or check for blown fuse.
• Check that the furnace power is on.
• Check all external wiring connections.
• Check the humidity control setting.
• Verify that pressure switch tubing isn't
pinched or obstructed.
• Call a professional heating contractor.
Rapid air changes.
Drafts (cold air is
dry and is an
added load to the
humidifier).
• Keep doors and windows closed.
• Close fireplace damper when not in use.
• Keep exhaust fan running time to a minimum.
• Seal around doors and windows.
Damper in
“summer” position
• Set damper blade to "winter" position to allow
humidification.
High
humidity
Condensation on
walls.
• Turn off humidity control and water until
condensation is completely evaporated.
Heavy
condensation on
windows.
• Turn humidity control down low enough to
eliminate condensation caused by moisture
from bathing, mopping, cooking, etc. If
moisture persists, more ventilation is needed.
Table 4. Troubleshooting Humidifier. (Continued)
69-2685ES_A.book Page 19 Friday, March 9, 2012 11:57 AM