Operation Manual

Configuring Event Settings | 111
800-21090V2 - A - 03/2016
To set up alarm input detection periods
1. On the Local Alarm tab, next to Period, click Set. The Set window opens.
2. By default, when alarm detection is enabled, it is active all the time. To modify the periods
when alarm detection is active, on each day’s timeline, click the half-hour blocks when you
want alarm detection for the selected alarm input to be disabled.
3. Alternatively, for the day of the week that you want to configure, click Setup. The Period
window opens.
a. Set up to six periods in the day when you want alarm detection for the selected alarm
input to be active.
b. Select the check box next to each configured period to enable it.
c. To copy the settings to additional days, select the appropriate check box(es) under
Copy.
d. Click Save to return to the previous window.
4. After you have finished setting up the alarm detection periods, click OK.