Operation Manual

www.honeywell.com/security
120 | Performance Series Full PoE Network Video Recorder User Guide
Figure 9-2 HDD Management Window
2. The HDD is configured as read-write by default. To change the HDD type to read-only, in
the Type column, select Read-only HDD.
Note The NVR restarts to apply the new setting.
3. To erase all the data from the HDD, click Format. A confirmation message appears:
"Confirm format on the selected device?" Click OK to continue.
SATA o indicates the current HDD is normal.
x indicates there is an error.
- indicates that there is no HDD.
? indicates that a HDD is damaged.
Device Name The HDD name.
Type The HDD type (read-write or read-only).
Status The current operating status of the HDD.
Free Space/
Total Space
The amount of free space remaining on the HDD/
The total capacity of the HDD.