Operation Manual

www.honeywell.com/security
126 | Performance Series Full PoE Network Video Recorder User Guide
Figure 10-1 General Configuration Tab
2. On the General tab, configure the following settings:
3. Click Apply to save your settings.
4. If you want to save your settings and exit the SETTING menu, click Save.
• Device Name Enter a device name for the NVR.
• Device No. Enter a device number for the NVR.
• Language Set the language of the user interface.
• Video Standard Set the video standard to NTSC or PAL .
• HDD Full Set to Overwrite to continue recording when the HDD is full. Set to
Stop Record to stop recording when the HDD is full. The default
setting is
Overwrite .
•Pack Duration Set the recording duration. Specify a time between 1 and 60 minutes.
The default setting is
60 min .
•Realtime Play Set the length of time to play back video using the realtime playback
function in live view mode. Specify a time between 5 and 60 minutes.
The default setting is
5 min .
• Auto Logout Set the length of time the NVR waits before logging out an inactive
user. Specify a time between
0 and 60 minutes. The default setting
is
10 min .
• Navigation Bar Select the check box to display the live view toolbar on the live view
screen. Clear the check box to hide the live view toolbar.
• Startup Wizard Select the check box to display the Startup Wizard at startup. Clear
the check box to bypass the Startup Wizard at startup.
•Mouse
Sensitivity
Set the desired mouse speed using the slider.