Operation Manual

Configuring System Settings | 127
800-21090V2 - A - 03/2016
Configuring Date and Time Settings
To configure the system time settings
1. Go to Main Menu > SETTING > SYSTEM > GENERAL > Date&Time.
Figure 10-2 Date and Time Configuration Tab
2. On the Date&Time tab, configure the following settings:
3. Click Apply to save your settings.
4. If you want to save your settings and exit the SETTING menu, click Save.
To configure the Daylight Saving Time (DST) settings
1. Go to Main Menu > SETTING > SYSTEM > GENERAL > Date&Time.
2. On the Date&Time tab, click to select the DST check box.
3. Specify when Daylight Saving Time begins and ends.
For example:
a. Since the specific dates change every year, select Date as the DST Type.
b. Set the Start Time as Mar 2nd Su 02:00 (the second Sunday in March at 2:00 a.m.).
• Date Format Select the date format that you want to use for the system time:
YYYY MM DD , MM DD YYYY , or DD MM YYYY .
•Time Format Select the time format that you want to use for the system time:
24-Hour or 12-Hour .
•Date Separator Select the separator that you want to use for the system time:
period ( . ), hyphen ( - ), or forward slash ( / ).
• System Time Enter the system time and time zone, and then click Save .