Operation Manual

Configuring System Settings | 129

800-21090V2 - A - 03/2016

2. On the Holiday Setup tab, click Add New Holidays. The Add New Holiday window

appears.

Figure 10-4 Add New Holiday Window

3. In the Holiday Name box, enter the name of the holiday that you want to add.

4. Set Repeat Mode to Once Only or All-Year.

Note If you want the NVR to recognize a particular day of the week as a holiday

year-round (for example, every Friday), set Repeat Mode to All-Year.

5. Set Holiday Range to Date or Week depending on whether you want to designate a

single day or one or more weeks as a holiday.

•If Date is selected, enter the year, month, and day in the Start Time and End Time

boxes.

•If Week is selected, enter the year, month, week of the month (1st, 2nd, 3rd, 4th,

Last), and day.

6. If you want to add more holidays, select the Add More check box.

7. Click Add to add the holiday.

8. After you have added the new holidays, on the Holiday Setup tab, set the Status of each

holiday. Select Open to enable the holiday or select Stop to disable it.

Configuring Display Settings

To configure the display settings

1. Go to Main Menu > SETTING > SYSTEM > DISPLAY > GUI.