Operation Manual
www.honeywell.com/security
22 | Performance Series Full PoE Network Video Recorder User Guide
• Chapter 10, Configuring System Settings, describes how to configure NVR system
settings, display settings, and user accounts; export and import configuration settings to
and from other NVRs; restore default settings; and upgrade the system firmware.
• Chapter 11, Viewing Information, describes how to view system, event, network, and log
information.
• Chapter 12, Troubleshooting, lists troubleshooting steps for resolving errors that you may
encounter when operating the NVR.
• Appendix A, Connecting Alarm Input/Outputs, provides guidelines for connecting alarm
inputs and outputs.
• Appendix B, Installing Hard Drives, lists the manufacturers and models of compatible
HDDs, including SATA HDDs and portable HDDs, and provides instructions for installing
an additional HDD.
• Appendix C, MAXPRO® Cloud, explains how to switch the NVR for MAXPRO Cloud mode.
• Appendix D, Specifications, lists the NVRs’ specifications.
• Appendix E, Index, lists commonly searched-for terms.
Related Documents
This document is a necessary prerequisite for understanding the Performance Series Full PoE
Network Video Recorder. For more information, please refer to the following documents:
Document title Part number Description
Embedded NVR Quick Installation
Guide
800-21088 Visually describes how to connect and start up an IP
Cameras.
Embedded NVR Quick Networking
Guide
800-21089 Visually describes how to configure network
connections, including the mobile application.
H2D2PR1(X) 1080p True Day/Night
IR Ball IP Camera Quick Installation
Guide
800-17073 Describes the physical setup of a H2D2PR1(X) ball
camera.
HBD2PR1(X) 1080p True Day/Night
IR Bullet IP Camera Quick Installation
Guide
800-17077 Describes the physical setup of a HBD2PR1(X) ball
camera.
Performance Series IP Cameras User
Guide
800-18161 Describes the Performance Series IP Cameras, how to
install them, how to configure them, and how to operate
them.