Operation Manual

www.honeywell.com/security
50 | Performance Series Full PoE Network Video Recorder User Guide
Live View Toolbar
If enabled, the live view toolbar appears along the bottom of the live view screen.
Figure 3-3 Live View Toolbar
The toolbar is disabled by default. To enable it, right-click and go to Main Menu > SETTING >
SYSTEM > GENERAL > General and select the Navigation check box. Right-click twice to
return to the live view screen. Click anywhere on the screen to display the toolbar.
Table 3-2 Live View Toolbar
Shortcut Menu
The shortcut menu is displayed by right-clicking anywhere on the screen in live view mode.
Main Menu Open Main Menu .
Screen Layout Select screen layout format.
Tour Control Enables a tour (automatically cycles through channel
views). See Configuring Tour Settings on page 130.
Pan/Tilt/Zoom Open the PTZ control panel. See Controlling PTZ
Cameras on page 52.
Camera Open the Camera setting window. See Adding a Remote
Device (Camera) on page 75.
Search Open the playback interface. See Playing Back Video on
page 67.
Event Open the Event information window.
Channel Info Open the Channel Info window.
Remote Device Add and configure a remote device (camera). See either
Using the Startup Wizard on page 39 or Adding a Remote
Device (Camera) on page 75.
Network
Open the Network window. See Configuring TCP/IP and
Port Settings
on page 85.
HDD Manage Open the HDD Manage window. See Configuring HDD
Management Settings on page 119.
USB Manage Open the USB Manage window.