Operation Manual

www.honeywell.com/security
54 | Performance Series Full PoE Network Video Recorder User Guide
Configuring PTZ Connection Settings
Before you can control a PTZ camera with the NVR, you must configure the PTZ connection
settings.
To configure the PTZ connection settings
1. Go to Main Menu > SETTING > SYSTEM.
2. In the left navigation pane, click PAN/TILT/ZOOM.
Figure 3-7 System Setting - PTZ
3. Configure the following settings:
4. Click Apply, and then click Save to save your settings and exit.
Configuring PTZ Functions
You can configure presets, tours, patterns, and borders using the PTZ control panel.
Configuring PTZ Presets
You can program preset positions for the PTZ camera. For example, you can point the camera
at a specific location, such as a doorway, when an alarm event occurs.
•Channel Select the channel (camera) for which you want to configure PTZ
settings.
• PTZ Type Select Remote for the PTZ type. A remotely connected IP camera is
connected through the network.