Operation Manual

Configuring Network Settings | 89
800-21090V2 - A - 03/2016
To configure 3G wireless connections
1. In the SETTING field in the Main Menu, go to NETWORK > 3G Setting.
Figure 7-4 Network 3G Settings Window
2. On the 3G Setting page, you can configure the following settings:
3. Click Apply to save your settings.
4. If you want to save your settings and exit the SETTING menu, click OK.
Enable Select or clear the check box to enable or disable 3G wireless
connection using the selected wireless network adapter.
3G Network1 Select the wireless network adapter name.
Network Type Select the network type that meets your requirements.
APN Select the wireless connection server that you want to use to
access the wireless network.
AUTH Select the authentication mode that you want to use to access
the wireless network: PAP or CHAP.
Dial Number Enter the 3G network dial-up number that you received from your
Internet service provider.
User Name Enter a user name for logging on to the 3G network.
User Password Enter a password for logging on to the 3G network.
Pulse Interval Enter the time, in seconds, of the 3G connection when the extra
stream is disabled. For example, if you enter 5 seconds, the 3G
connection lasts for 5 seconds and then the device automatically
disconnects. If there is no extra stream, there is no restriction on
the connection time.
Dial Click Dial to manually enable or disable the 3G network
connection.