Operation Manual

Configuring Network Settings | 93
800-21090V2 - A - 03/2016
6. Click Apply to save your settings.
7. If you want to save your settings and exit the SETTING menu, click OK.
Configuring Email Settings
To configure email notifications
1. In the SETTING field in the Main Menu, go to NETWORK > Email.
Figure 7-8 Network Email Settings Window
2. On the EMAIL page, select the Enable check box to enable email notifications for alarm
events.
3. Configure the following settings:
• SMTP Server Enter the SMTP server address of the sender’s email account.
•Port The default TCP/IP port used for SMTP is 25.
• Anonymous Select the check box to hide the sender’s address in sent email.
•Username Enter the user name of the sender’s email account.
• Password Enter the password of the sender’s email account.
• Receiver Enter the email address where you want to send the notification.
You can enter up to three email addresses.
•Sender Enter the sender’s email address.
•Title Enter the email subject.
• Attachment Select the check box to enable sending an attachment with the
email.
•Encrypt Type Select an encryption type: None, SSL, or TLS.
• Event Interval This is the interval for sending emails. Enter a time between 0 and
3600 seconds. 0 means that there is no interval.