Operation Manual

NVR Configurations | 101
800-18160 - A - 06/2014
Note In the Detection interface, the copy-and-paste function is only valid for the same
type of event detection. You can not copy a channel setup in video loss mode to
camera masking mode.
Configuring Video Loss Settings
The Video Loss function allows you to be informed when video loss has occurred.
TIP! You can enable an alarm output channel, and then enable the Show Message function.
Select Video Loss from the Event Type drop-down list.
Figure 3-51 Video Loss Configuration Interface
Table 3-24 Video Loss Detection Configurations
Configuration Description
Event Type Select the event detection type. Select from Motion
Detection, Video Loss, or Camera Masking.
Channel Select a channel.
Enable Click to enable event detection.