Operation Manual

www.honeywell.com/security
112 | Embedded Network Video Recorder User Guide
Note You must click Save after configuring the settings to save them.
Configuring Default Settings
Click the DEFAULT icon in the Setting interface to open the Default configuration
interface.
In the Default interface, you can click to select what parameters are returned to their default
settings. Choose from:
• Select All
• General
• Remote Device
•Schedule
•RS232
•Network
•Alarm
• Detect
• Pan/Tilt/Zoom
•Display
• Channel Name
Resolution Select from four options: 1920x1080 (default), 1280x1024,
1280x720, and 1024x768.
Image Enhance Click to enable.
Enable Tour Click to enable.
Interval The system supports a 1/4-window tour. Enter a time interval
for switching from one channel to the next in a tour. Select
from 5 to 120 seconds. If enabled here, your NVR will
automatically start Interval view when the display is switched
to single-channel mode.
While in a tour, you can use the mouse or click Shift to turn on
the window switch function. is the icon for the opening
switch function, is the icon for the closing switch function.
Monitor Tour Type The system supports 1/8-window tour.
Alarm Tour Type The system supports 1/8-window tour.
Table 3-28 Display Configurations
Configuration Description