Operation Manual

www.honeywell.com/security
188 | Embedded Network Video Recorder User Guide
The configuration for Net Alarms is very similar to the configuration for Local Alarms. Please
see Configuring Local Alarms on page 184 for more information.
Configuring External Alarms
Configure the External Alarms so that the NVR can detect alarm signals from the IP cameras.
The system does not support anti-dither and sensor type setup.
Click IPC External Alarm in the Alarm configuration interface to open the IPC External Alarm
configuration interface.
Figure 5-46 IPC External Alarm Configuration Interface
The configuration for IPC External Alarms is very similar to the configuration for Local Alarms.
Please see Configuring Local Alarms on page 184 for more information.
Configuring for No Signal
The system can generate an alarm if the network camera goes offline.
Click No Signal in the Alarm configuration interface to open the No Signal configuration
interface.