Operation Manual

Web Operation | 189
800-18160 - A - 06/2014
Figure 5-47 No Signal Configuration Interface
The configuration for No Signal Alarms is very similar to the configuration for Local Alarms.
Please see Configuring Local Alarms on page 184 for more information.
Configuring for Abnormalities
Click Abnormality in the Event configuration interface to open the Abnormality configuration
interface.
There are six types of abnormalities:
• No Disk
•Disk Error
• No Space
• Net Disconnection
•IP Conflict
•MAC Conflict
You can configure how the system responds to each kind of abnormality. The configuration is
similar for each type.
Figure 5-48 Configuring for Abnormalities
Note The No Disk configuration interface is shown here as an example. The other
configuration interfaces, and the configuration does on the interfaces, are similar.