Operation Manual

800-18160 - A - 06/2014
About This Document
This document introduces the Honeywell Embedded Network Video Recorder. It explains how
to install and operate the Embedded Network Video Recorder.
This document is intended for installers and users.
Overview of Contents
This document contains the following chapters and appendixes:
• Chapter 1, Introduction, introduces the Embedded Network Video Recorder, including
descriptions of their features and illustrations showing the cameras’ dimensions.
• Chapter 2, Installation, describes how to install and connect the NVR, including alarm and
bi-directional audio connections.
• Chapter 3, NVR Configurations, describes how to configure your NVR, including how to log
into your NVR, and how to configure your NVR’s settings.
• Chapter 4, Honeywell Configuration Tool, describes how to install and use the Quick
Configuration tool for configuring your NVR.
• Chapter 5, Web Operation, describes how to connect to your camera over the internet, the
user interface, and how to remotely configure and operate your camera.
• Appendix A, Troubleshooting, describes possible problems and their solutions.
• Appendix B, Daily Maintenance, describes how to care for your NVR.
• Appendix C, Compatible SATA HDD, lists the manufacturers and models of compatible
SATA HDD.
• Appendix D, Compatible USB 2.0 Devices, lists the manufacturers and models of USB 2.0
storage devices.
• Appendix E, Compatible Monitors, lists the manufacturers and models of compatible
monitors.
• Appendix F, Specifications, provides the NVR’s specifications.
•The Index, provides a searchable list for easy access to the document.