Operation Manual
www.honeywell.com/security
214 | Embedded Network Video Recorder User Guide
Problem: The NVR cannot detect the hard disk
Possible solutions:
• Check the HDD cable connection.
• Check the HDD and HDD ribbon. They might be damaged and require replacement.
• Replace the Main board SATA port.
Problem: The real-time video color is distorted
Possible solutions:
• Check the NTSC and PAL setup when using the BNC output. If this setup is incorrect, the
real-time video appears black and white.
• Check the compatibility of the resistance between the NVR and the monitor.
• Check the video transmission. The clip might be too long or there is a lot of file
degradation.
• Check the NVR’s color and/or brightness settings.
Problem: Motion detection does not work
Possible solutions:
• Check that the period setup is correct. [Motion detection active period?] See Configuring
the Schedule on page 66.
• Check the motion detection zone setup.
• Check that the motion sensitivity level is not too low.