Operation Manual

800-18160 - A - 06/2014
3
NVR Configurations 3
This chapter includes:
• Logging into the NVR.
• An overview of the NVR GUI, including live viewing, searching, and playing back.
• Instructions on configuring the NVR.
Logging In to Your NVR
Before you can open the GUI for your NVR, you must do the following:
1. Connect your NVR to a monitor.
2. Connect the mouse and power cable to the NVR.
3. Click the power button on the NVR’s rear panel to turn on the NVR.
The NVR will boot up and you will see the GUI, which is in multiple-channel display mode,
and the default mode.