Operation Manual

www.honeywell.com/security
62 | Embedded Network Video Recorder User Guide
Time format Select from either 24-hour mode or 12-hour mode.
Language Your NVR supports 12 languages: Arabic, Czechoslovakian,
Dutch, English, French, German, Italian, Polish, Portuguese,
Russian, Spanish, and Turkish.
HDD full setting Configure what happens when the HDD is full. Select from Stop
Recording and Rewrite.
Stop Recording: If the currently working HDD is overwritten or is
full while the next HDD is not empty, then the system stops
recording.
Rewrite: If the currently working HDD is full and the next HDD is
not empty, then the system overwrites the files saved on the HDD.
Pack duration Configure how long the NVR records. Select from 60 to 120
minutes. The default is 60 minutes.
Device No. Used when you are using one remote control to control several
NVRs. Assign a device number for each NVR.
Video standard Select from NTSC or PAL.
Realtime play Configure the playback time for Preview. Select from 5 to 60
minutes.
Device ID Enter a device name.
Holiday setting Click Setup on the General setting interface to open the Holiday
Setting interface.
Go to the Holidays Period interface to set the holiday recording
setup. See Holiday Settings on page 197.
Note When you enable Holiday settings and a schedule at the
same time, the Holiday settings has priority. This means
that if a selected day is a holiday, then the NVR follows the
holiday setting and ignores the schedule setting. But if the
selected day is not a holiday, then the NVR follows the
schedule setting. See Holiday Settings on page 1
97.
Note There is no year setup on the Holiday setting. This might be
confusing for holidays that do not fall on the same date
each year. For example, if you set a holiday for October 30,
2014, October 30th will be considered a holiday for every
year after.
Table 3-8 General Settings
Setting Description