Operation Manual

NVR Configurations | 63
800-18160 - A - 06/2014
Configuring the Encoding Settings
Click the Encode icon in the Setting interface to open the Encode interface.
Mouse properties Click MouseSet to open the mouse setup interface.
You can configure the mouse double-click speed. Click Default to
restore the mouse settings to the default setup.
Startup wizard If you check to enable the Startup wizard, then the next time the
NVR restarts, it will open to the Startup wizard. If you do not check
to enable the Startup wizard, the NVR opens to the login interface.
Auto logout Configure how long the user can be inactive before the NVR
automatically logs out the inactive user. Select from 0 to 60
minutes.
Navigation bar Check to enable the navigation bar, and it appears on the GUI.
IPC Time Sync Configure an interval for synchronizing the NVR’s time with the IP
camera time.
Table 3-8 General Settings
Setting Description