Operation Manual

www.honeywell.com/security
68 | Embedded Network Video Recorder User Guide
Note If you have configure the NVR to record when motion detection and alarms occur
(MD&Ala), then the NVR will not record if it detects only motion detection or an
alarm.
Quick Setup
The Copy button allows you to copy one channel’s setup to other channels.
1. Click Copy after configuring a channel.
The Copy interface appears.
Figure 3-26 Copy Interface
The currently selected channel is highlighted in gray.
2. Click to select the channel or channels to which you want to copy the settings. Click All to
select all channels.
3. Click OK in the Copy interface, then click OK again in the Encode/Schedule interface to
complete the copy function.
Note If you select All, then the recording setup for all channels is the same, and then
the Copy button disappears.
Configuring RS232
Click the RS232 icon in the Setting interface to open the RS232 configuration interface.