Operation Manual

www.honeywell.com/security
80 | Embedded Network Video Recorder User Guide
Double-click the UPnP item in the list to configure it. A configuration window appears.
Figure 3-35 Port Info Configuration Interface
Configuring the WIFI Settings
The Network Settings interface shows the WIFI connection status. The interface shows the
current connection status and the IP address, if there is a connection.
WAN IP The router IP in the WAN.
Port Mapping list (PAT
Table)
This is the one-to-one relationship with the router’s port
mapping setting.
Enable Switch A check mark
in the box ❐ indicates that port mapping is
enabled for this port.
List Service Name: Defined by the user.
Protocol: The protocol type.
Internal port: The port that has been mapped in the router.
External port: The port that has been mapped locally.
Default Click to restore the UPnP default port settings, which is the
HTTP, TCP, and UDP for the NVR.
Add to the List Click to add the mapping relationship.
Delete Click to remove a mapping item.
Table 3-18 UPnP Configurations
Parameter Function