Operation Manual

www.honeywell.com/security
92 | Embedded Network Video Recorder User Guide
Period Configure when the local alarm period is active.
1. Click Set. The Set configuration interface appears.
2. Select a a day of the week, or Work Day or Free Day.
Note If you select Work Day or Free Day, a Set button
appears so you can configure which days are Work
Days and which days are Free Days. Click Set, select
the Work Days and the Free Days, then click Save.
3. Enter a time range for the alarm, then click the check box
to select that time range.
Note Newer configurations override previous
configurations. For example, if you configure Work
Days with an alarm period from 8:30 to 17:30, and then
Configure a Monday alarm period for 7:10 to 18:00, the
Monday alarm period overrides the Work Day alarm
period. So on Mondays, the alarm period will be 7:10
to 18:00.
Table 3-22 Alarm Configurations
Parameter Description