Operation Manual

www.honeywell.com/security
34 | Performance Series Full Poe Embedded NVR Remote User Guide
Note The NVR automatically defaults to selecting channel 1 when you navigate
between configuration interfaces. For example, if you have selected channel 3 on
the Video&Audio configuration interface, and then navigate to the Channel Name
configuration interface, the NVR defaults to channel 1 in the Channel selection
drop-down.
Figure 3-1 Camera Conditions Interface
Table 3-1 Camera Conditions
Setting Description
Channel Select a channel from the dropdown list.
Note The NVR shows only the number of connected
cameras.
Scene Select a pre-programmed scene selection for different kinds
of lighting conditions for various times of the day. Select from
Day, Night, Normal, or Switch by Period. If you select
Switch by Period, then you configure the times for sunrise
and sunset.
Saturation Adjusts monitor window saturation. Select from 0 to 100. The
default setting is 50. The recommended range is 40 to 60.
The higher the number, the stronger the color. This value has
no effect on the general brightness of the video. The video
color might become too strong if the value is too high.
Note If the value is too low, the video might be poor.
Mirror Enable or disable the mirror function.