Operation Manual

Configuration | 49
800-21261V3 - A - 05/2016
Domain name: There are two modes: Default domain name and customized domain name.
Except for the default domain name registration, you can also use a customized domain name.
After you have successfully registered a domain name, you can log in using it instead of the
device IP.
User name: Optional. Enter your email address.
IMPORTANT! Do not register frequently. You must wait at least 60 seconds between attempts at logging in.
Too many attempts might cause a server crash.
The system might take back a domain name if it is idle for one year. If your email is set up
correctly, you will get an email notification before the domain name is canceled.
Configuring the IP Filter
1. Click IP Filter under NETWORK to open the IP Filter configuration interface.
Figure 3-14 IP Filter Configuration Interface
2. Click to enable Trusted Sites, and only the listed IP addresses can access the current
NVR.
OR
Click to enable Blocked Sites, and the listed IP addresses can not access the current
NVR.
Adding Trusted or Blocked Sites
1. Click Add to open the Add configuration interface.
2. Select IP Address or IP Section from the drop-down menu.
3. Select IPv4 or IPv6 from the drop-down menu.
4. Enter the IP address in the IP address field.
5. Click Save.