Operation Manual

www.honeywell.com/security
56 | Performance Series Full Poe Embedded NVR Remote User Guide
Figure 3-20 Auto Register Configuration Interface
2. Click to enable Auto Registration.
3. Enter a Proxy Server IP, Port, and Sub device ID.
4. Click to enable Auto Registration.
5. Then click Save.
Alarm Centre
You can connect your alarm platform to the NVR’s Alarm Center to develop alarm functions.
When a local alarm occurs, the NVR system can upload alarm signals to the Alarm Centre.
Before using the Alarm Centre, you must configure the server IP, Port, and Protocol Type.
When an alarm occurs, the NVR system can send data, as defined by the protocol, to the client.
1. Click Alarm Center under NETWORK to open the Alarm Center configuration interface.
Figure 3-21 Alarm Centre Configuration Interface